August 17, 2009

Beth Dickey Headquarters, Washington
202-358-2087 beth dickey-1@nasa gov

H Keith Henry Langley Research Center, Va 757-864-6120/344-7211 h k henry@nasa gov

Keith Koehler Wallops Flight Facility, Wallops Island, Va 757-824-1579 keith a koehler@nasa gov

RELEASE: 09-188

NASA LAUNCHES NEW TECHNOLOGY: AN INFLATABLE HEAT SHIELD

WALLOPS ISLAND, Va -- A successful NASA flight test Monday demonstrated how a spacecraft returning to Earth can use an inflatable heat shield to slow and protect itself as it enters the atmosphere at hypersonic speeds

The Inflatable Re-entry Vehicle Experiment, or IRVE, was vacuum-packed into a 15-inch diameter payload "shroud" and launched on a small sounding rocket from NASA's Wallops Flight Facility on Wallops Island, Va , at 8:52 a m EDT The 10-foot diameter heat shield, made of several layers of silicone-coated industrial fabric, inflated with nitrogen to a mushroom shape in space several minutes after liftoff

The Black Brant 9 rocket took approximately four minutes to lift the experiment to an altitude of 131 miles Less than a minute later it was released from its cover and started inflating on schedule at 124 miles up The inflation of the shield took less than 90 seconds

"Our inflation system, which is essentially a glorified scuba tank, worked flawlessly and so did the flexible aeroshell," said Neil Cheatwood, IRVE principal investigator and chief scientist for the Hypersonics Project at NASA's Langley Research Center in Hampton, Va "We're really excited today because this is the first time anyone has successfully flown an inflatable reentry vehicle "

According to the cameras and sensors on board, the heat shield expanded to its full size and went into a high-speed free fall The key focus of the research came about six and a half minutes into the flight, at an altitude of about 50 miles, when the aeroshell re-entered Earth's atmosphere and experienced its peak heating and pressure measurements for a period of about 30 seconds

An on board telemetry system captured data from instruments during the test and broadcast the information to engineers on the ground in real time The technology demonstrator splashed down and sank in the Atlantic Ocean about 90 miles east of Virginia's Wallops Island

"This was a small-scale demonstrator," said Mary Beth Wusk, IRVE project manager, based at Langley "Now that we've proven the concept, we'd like to build more advanced aeroshells capable of handling higher heat rates "

Inflatable heat shields hold promise for future planetary missions, according to researchers To land more mass on Mars at higher surface elevations, for instance, mission planners need to maximize the drag area of the entry system The larger the diameter of the aeroshell, the bigger the payload can be

The Inflatable Re-entry Vehicle Experiment is an example of how NASA is using its aeronautics expertise to support the development of future spacecraft The Fundamental Aeronautics Program within NASA's Aeronautics Research Mission Directorate in Washington funded the flight experiment as part of its hypersonic research effort

For images and more information about the experiment, visit:

http://www nasa gov/topics/aeronautics/features/irve html

-end-

To subscribe to the list, send a message to: hqnews-subscribe@mediaservices nasa gov To remove your address from the list, send a message to: hqnews-unsubscribe@mediaservices nasa gov

The following information is a reminder of your current mailing list subscription:

You are subscribed to the following list: [list_name]

using the following email: example@example.com

You may automatically unsubscribe from this list at any time by visiting the following URL:

http://www aus-city com/cgi-bin/dada/mail cgi/u/[list]/

If the above URL is inoperable, make sure that you have copied the entire address Some mail readers will wrap a long URL and thus break this automatic unsubscribe mechanism

You may also change your subscription by visiting this list's main screen:

<[program_url]/list/[list]>

If you're still having trouble, please contact the list owner at:

<mailto:[list_owner_email]>

The following physical address is associated with this mailing list:

[physical_address]