March 15, 2013

J D Harrington Headquarters, Washington 202-358-5241 j d harrington@nasa gov

Christina Thompson Northrop Grumman Corporation, Redondo Beach, Calif 310-812-2375 christina thompson@ngc com

Jennifer Bowman ATK, Magna, Utah 435-279-3159 jennifer bowman@atk com

RELEASE: 13-072

NASA'S WEBB TELESCOPE GETS ITS WINGS

WASHINGTON -- A massive backplane that will hold the primary mirror of NASA's James Webb Space Telescope nearly motionless while it peers into space is another step closer to completion with the recent assembly of the support structure's wings

The wings enable the mirror, made of 18 pieces of beryllium, to fold up and fit inside a 16 4-foot (5-meter) fairing on a rocket, and then unfold to 21 feet in diameter after the telescope is delivered to space All that is left to build is the support fixture that will house an integrated science instrument module, and technicians will connect the wings and the backplane's center section to the rest of the observatory The center section was completed in April 2012

"This is another milestone that helps move Webb closer to its launch date in 2018," said Geoff Yoder, NASA's James Webb Space Telescope program director, NASA Headquarters, Washington

Designed, built and set to be tested by ATK at its facilities in Magna, Utah, the wing assemblies are extremely complex, with 900 separate parts made of lightweight graphite composite materials using advanced fabrication techniques ATK assembled the wing assemblies like a puzzle with absolute precision ATK and teammate Northrop Grumman of Redondo Beach, Calif , completed the fabrication

"We will measure the accuracy down to nanometers -- it will be an incredible engineering and manufacturing challenge," said Bob Hellekson, ATK's Webb Telescope program manager "With all the new technologies that have been developed during this program, the Webb telescope has helped advance a whole new generation of highly skilled ATK engineers, scientists and craftsmen while helping the team create a revolutionary telescope "

When fully assembled, the primary mirror backplane support structure will measure about 24 feet by 21 feet and weigh more than 2,000 pounds The backplane must be very stable, both structurally and thermally, so it does not introduce changes in the primary mirror shape, and holds the instruments in a precise position with respect to the telescope While the telescope is operating at a range of extremely cold temperatures, from minus 406 to minus 360 degrees Fahrenheit, the backplane must not vary more than 38 nanometers (about one one-thousandth the diameter of a human hair) The thermal stability requirements for the backplane are unprecedented

"Our ATK teammates demonstrated the thermal stability on test articles before building the wing assemblies with the same design, analysis, and manufacturing techniques One of the test articles ATK built and tested is actually larger than a wing," said Charlie Atkinson, deputy Webb Optical Telescope Element manager for Northrop Grumman in Redondo Beach, Calif "The mirrors are attached to the wings, as well as the rest of the backplane support structure, so the alignment is critical If the wings distort, then the mirror distorts, and the images formed by the telescope would be distorted "

The James Webb Space Telescope is the successor to NASA's Hubble Space Telescope It will be the most powerful space telescope ever built and observe the most distant objects in the universe, provide images of the first galaxies formed and see unexplored planets around distant stars The Webb telescope is a joint project of NASA, the European Space Agency and the Canadian Space Agency

For the news release on the completion of the center section of the backplane, visit:

http://go nasa gov/Zuggpq

For a "Behind the Webb" series video about the backplane, visit:

http://go nasa gov/Zugltr

For more information about the James Webb Space Telescope, visit:

http://www jwst nasa gov

-end-

To subscribe to the list, send a message to: hqnews-subscribe@mediaservices nasa gov To remove your address from the list, send a message to: hqnews-unsubscribe@mediaservices nasa gov

The following information is a reminder of your current mailing list subscription:

You are subscribed to the following list: [list_name]

using the following email: example@example.com

You may automatically unsubscribe from this list at any time by visiting the following URL:

https://aus-city com/cgi-bin/dada/mail cgi/u/NASA_REPORTS/example/example com/

If the above URL is inoperable, make sure that you have copied the entire address Some mail readers will wrap a long URL and thus break this automatic unsubscribe mechanism

You may also change your subscription by visiting this list's main screen:

<[program_url]/list/[list]>

If you're still having trouble, please contact the list owner at:

<mailto:[list_owner_email]>

The following physical address is associated with this mailing list:

[physical_address]