Date: November 17th 2007

Nov 16, 2007

George Diller Kennedy Space Center, Fla 321-867-2468 george h diller@nasa gov

STATUS REPORT: S-111607

NASA'S SPACE SHUTTLE PROCESSING STATUS REPORT

Note: NASA's Kennedy Space Center issues Space Shuttle Processing Status Reports periodically and is the source for information regarding processing activities associated with the vehicles and payloads If you are a member of the media and would like further information, visit:
http://www nasa gov/centers/kennedy/news/index html

Mission: STS-122 - 24th International Space Station Flight - Columbus Module Vehicle: Atlantis (OV-104) Location: Launch Pad 39A Launch Date: Targeted for Dec 6, 2007 Crew: Frick, Poindexter, Schlegel, Eyharts, Love, Melvin, Walheim Inclination/Orbit Altitude: 51 6 degrees/122 nautical miles

On Nov 10, the STS-122 shuttle stack rolled from the Vehicle Assembly Building to Launch Pad 39A, where workers are performing closeout connections and system verification checks Atlantis' payload, including the Columbus module, was installed in the orbiter cargo bay on Sunday Hypergolic propellant, which powers the maneuvering systems on both the orbiter and the solid rocket boosters, has been loaded The astronauts will arrive on Saturday for the three-day terminal countdown demonstration test This is a countdown dress rehearsal and a training exercise for the flight crew It will conclude on Nov 20 with the astronauts on the flight deck of Atlantis They will be participating in the last three hours of the simulated countdown while working with the launch team located in Firing Room 4 of the Launch Control Center

Mission: STS-123 - 25th International Space Station Flight - Kibo, Dextre Vehicle: Endeavour (OV-105) Location: Orbiter Processing Facility Bay 2 Launch Date: Targeted for Feb 14, 2008 Launch Pad: 39A Crew: Gorie, Johnson, Linnehan, Doi, Behnken, Foreman, Reisman Inclination/Orbit Altitude: 51 6 degrees/122 nautical miles

In Orbiter Processing Facility bay No 2, the three main engines have been installed on Endeavour and integrated testing with the main propulsion system begins today Functional testing of the waste containment system is complete Payload pre-mate testing has finished The orbiter boom sensor system, which was recently removed from Discovery, arrived this week in the facility's bay No 2 The system has undergone post-flight inspections and thermal blanket installation, and is being temporarily installed today to allow for fit checks This week, technicians began working to bond BRI tiles around the main landing gear door The rudder speed brake has been configured for flight and the orbiter drag chute is installed

Mission: STS-124 - 26th International Space Station Flight - Kibo Pressurized Module, Japanese Remote Manipulator System Vehicle: Discovery (OV-103) Location: Orbiter Processing Facility Bay 3 Launch Date: Targeted for April 24, 2008 Launch Pad: 39A Crew: Kelly, Ham, Nyberg, Garan, Fossum, Hoshide Inclination/Orbit Altitude: 51 6 degrees/122 nautical miles

In Orbiter Processing Facility bay No 3, the end-of-mission/integrated roll-in operations are complete The payload bay doors were opened last weekend and the Ku-band antenna was deployed Orbiter power system validations and radiator inspections have finished The orbiter boom sensor system was removed and transferred to bay No 2 for installation in Endeavour Inspections of the reinforced carbon-carbon panels on the wing leading edges are under way The external airlock hatch functional test is complete Preparations are in progress for offloading hypergolic fuel Post-flight inspection of the thermal protection system is halfway complete

-end-

To subscribe to the list, send a message to: ksc-subscribe@newsletters nasa gov To remove your address from the list, send a message to: ksc-unsubscribe@newsletters nasa gov

The following information is a reminder of your current mailing list subscription:

You are subscribed to the following list: [list_name]

using the following email: example@example.com

You may automatically unsubscribe from this list at any time by visiting the following URL:

http://www aus-city com/cgi-bin/dada/mail cgi/u/[list]/

If the above URL is inoperable, make sure that you have copied the entire address Some mail readers will wrap a long URL and thus break this automatic unsubscribe mechanism

You may also change your subscription by visiting this list's main screen:

http://www aus-city com/cgi-bin/dada/mail cgi/list/[list]

If you're still having trouble, please contact the list owner at: