Nov 9, 2007

George Diller Kennedy Space Center, Fla 321-867-2468 george h diller@nasa gov

STATUS REPORT: S-110907

NASA'S SPACE SHUTTLE PROCESSING STATUS REPORT

Note: NASA's Kennedy Space Center issues Space Shuttle Processing Status Reports periodically and is the source for information regarding processing activities associated with the vehicles and payloads If you are a member of the media and would like further information, visit:
http://www nasa gov/centers/kennedy/news/index html

Mission: STS-120 - 23rd International Space Station Flight - U S Node 2 (Harmony) Vehicle: Discovery (OV-103) Location: Orbiter Processing Facility Bay 3 Launch Date: Oct 23, 2007 KSC Landing Date: Nov 7, 2007 Crew: Melroy, Zamka, Parazynski, Wheelock, Wilson, Nespoli and Anderson Inclination/Orbit Altitude: 51 6 degrees/122 nautical miles

The STS-120 mission ended on Nov 7 when Discovery touched down at Kennedy Space Center’s runway 33 at 1:01 p m The mission lasted 15 days and Discovery completed 238 revolutions around the Earth and traveled 6 25 million miles Discovery delivered the Harmony Node with its 2,600 cubic feet of pressurized volume Harmony was placed in a temporary location and will be relocated by the Expedition 16 crew over the next three weeks, before the next shuttle mission arrives The STS-120 crew also moved the Port 6 truss segment and its accompanying solar arrays to its permanent home at the end of the station’s truss, and repaired damage done to the solar array as it was being redeployed

Discovery is now back in its hangar at Orbiter Processing Facility bay 3 Preparations are under way for offloading the residual cryogenic reactants this weekend, followed by opening the payload bay doors and the start of detailed post-flight inspections At this time, Discovery appears to have few issues

Mission: STS-122 - 24th International Space Station Flight - Columbus Module Vehicle: Atlantis (OV-104) Location: Vehicle Assembly Building Launch Date: Targeted for Dec 6, 2007 Launch Pad: 39A Crew: Frick, Poindexter, Schlegel, Eyharts, Love, Melvin and Walheim Inclination/Orbit Altitude: 51 6 degrees/122 nautical miles

On Nov 3, Atlantis rolled from Orbiter Processing Facility bay 1 to the Vehicle Assembly Building, where it was lifted up and into high bay 3 to be connected to the external fuel tank on the mobile launch platform Workers spent the week closing out connections between the solid rocket boosters, tank and orbiter, and performing interface tests to verify that all the space shuttle elements are working as a fully integrated launch vehicle Rollout from the assembly building to Launch Pad 39A is scheduled for 4 a m Saturday The Columbus laboratory module will be installed into the orbiter’s payload bay on Sunday The terminal countdown demonstration test with the STS-122 astronauts is scheduled for Nov 18–20

Mission: STS-123 - 25th International Space Station Flight - Kibo, Dextre Vehicle: Endeavour (OV-105) Location: Orbiter Processing Facility Bay 2 Launch Date: Targeted for Feb 14, 2008 Launch Pad: 39A Crew: Gorie, Johnson, Linnehan, Doi, Behnken, Foreman and Reisman Inclination/Orbit Altitude: 51 6 degrees/122 nautical miles

In Orbiter Processing Facility bay 2, installation of replacement overhead window No 8 is in progress Installation of a new reinforced carbon-carbon panel, RCC No 10 right (10R), is under way Technicians are preparing the orbiter for installation of the engines, scheduled for next week The crew module hatch functional test is nearing completion Thermal protection system work continues on the main landing gear doors, wings, elevons and orbital maneuvering system pods Payload pre-mate testing is under way Liquid oxygen tank No 1 is installed and is undergoing leak checks

-end-

To subscribe to the list, send a message to: ksc-subscribe@newsletters nasa gov To remove your address from the list, send a message to: ksc-unsubscribe@newsletters nasa gov

The following information is a reminder of your current mailing list subscription:

You are subscribed to the following list: [list_name]

using the following email: example@example.com

You may automatically unsubscribe from this list at any time by visiting the following URL:

http://www aus-city com/cgi-bin/dada/mail cgi/u/[list]/

If the above URL is inoperable, make sure that you have copied the entire address Some mail readers will wrap a long URL and thus break this automatic unsubscribe mechanism

You may also change your subscription by visiting this list's main screen:

http://www aus-city com/cgi-bin/dada/mail cgi/list/[list]

If you're still having trouble, please contact the list owner at:

<mailto:list
admin@aus-city
com>

The following physical address is associated with this mailing list:

http://www aus-city com