AUS-CITY
Posted By: smyrna tecniquaL QUESTION - Fri 30 Sep 2005 05:25:PM
i just want to ask question. i have been watching optus B3 since 2003. but today channels stoped i tried every thing but nothing change. i am wonderin why? i am thinging may be lnb broken? any idea of reasons? thanks for helping me<br />smyrna
Posted By: mr_mixer Re: tecniquaL QUESTION - Sat 01 Oct 2005 07:52:AM
More detiles,about box,how many dish you connect to the box?<br />Dou you have signal?
Posted By: smyrna Re: tecniquaL QUESTION - Sat 01 Oct 2005 02:55:PM
one dish connected, no signal.
Posted By: mr_mixer Re: tecniquaL QUESTION - Sun 02 Oct 2005 07:34:AM
Dish must loose the position.Try other Box if you can.
Posted By: smyrna Re: tecniquaL QUESTION - Sun 02 Oct 2005 03:58:AM
i dont have other box. only one box i have got. <br />so how can i chech it?
Posted By: LAZER Re: tecniquaL QUESTION - Sun 02 Oct 2005 04:00:AM
have u tried just unplugging the box from the power and plugging it back in again?
Posted By: smyrna Re: tecniquaL QUESTION - Sun 02 Oct 2005 04:57:AM
nothing changed..
Posted By: mr_mixer Re: tecniquaL QUESTION - Sun 02 Oct 2005 09:05:AM
Check diseqc settings in the box.It will be fix and off.
Posted By: smyrna Re: tecniquaL QUESTION - Tue 04 Oct 2005 05:04:AM
heyyyy greatttt got it <br />thanks mate...<br />thank you very much.. the problem was diseqc. i fixed it now thanks
Posted By: abebabe Re: tecniquaL QUESTION - Wed 05 Oct 2005 04:36:AM
how do you check diseqc?<br />I also lost my B3 channels (my pas 8) are still working? 2 satellites linked to the same machine
Posted By: mr_mixer Re: tecniquaL QUESTION - Wed 05 Oct 2005 07:56:AM
you got 2 fix dish there.You must have Diseqc switch.For pas8 diseqc 1 or 2 and for B3 diseqc 1 or 2.If pas8 on diseqc 1 set the B3 on diseqc 2.<br />From "menu" go to "antenna setings".<br /><br />Antenna=fix<br />diseqc =<br />Pas 8---->1 <br />B3 ---->2<br /><br />OR <br /><br />Pas8--->2<br />B3 --->1<br />Good luck<br /> <br /> <small>[ 05. October 2005, 09:28 AM: Message edited by: mr_mixer ]</small>
© AUS-CITY Message Forums