Aghapy TV - FTA on Optus B3
12564 H 30000 2/3
Hi, can anyone help me please to set up Aghapy channel, thanks.
I called UBI yesterday, but the lady told me that they don't help for public channels. Anyway, she told me to enable Signal Setup 2, 3 and 4 and then select Tune and Scan. Next, she asked me to go to public and asked me to select channel 6 for Aghapy, but what was there is Trinity channel!
Please help me to setup this channel, and if possible with steps required. Thank you again.
bjh,
You will need to replace the Signal Setup 4 details with the details LAZERSAT has provided above.
thanks liski, you are a great help. I'll try when return to home
Hi Liski,
I tried what you told me with no luck, still channel 6 is Trinity and not Aghapy!
I changed Signal Setup 4 to Enabled 12564 Horizontal 30000 2/3, then selected Tune and Scan.
any ideas? thank you
bjh,
If SS4 is enabled then it should work. Try searching each channel as maybe it has moved since you have SS2 and SS3 enabled.
thanks Liski, I found it on channel 514 !