posted by phill sometime ago!!!! hope you don;t mind me posting it again phill!!<br /><br />posted 15 August, 2004 08:41 PM <br />--------------------------------------------------------------------------------<br />FOR ALL<br />1/Put you dish on Optus B3 and align it<br /><br />2/ Get your useless "X" TARBS box and connect it to the dish ON OPTUS B3<br /><br />3/ Get into the menu (PIN NUMBER 8272 for the older box)<br /><br />4/Change the Freq to 12674 H, S/R 22500 FEC 3/4 or leave it a AUTO.<br /><br />5/press EXIT to SAVE.<br /><br />6/ NOW for older boxes or most of them there is a little reset button on the rear,(RIGHT SIDE LOOKING FROM FRONT) press it and it will re-boot and re map, 80% of the time the reset button on rear will have to be hit to force the change of freq. Also re map you channels if box fails,,,,,. It has a funny problem liking that freq but once locked in its ok<br /><br />7/Now you have 2 transponders and plenty more channels.<br /><br />8/For some of you you will not be able to VIEW,,,, I mean VIEW,,, the second Transponder as they are playing with the encryption so in other words it will tell you you are not authorised to view these channels.<br /><br />GO FOR IT BOYS!!!!!!!!!!!!!!!!!!!11<br /> <br /> <small>[ 22. September 2004, 10:41 PM: Message edited by: Uruguay ]</small>