ok..maight..what u do is u need someone near the tv to see if the signal goes red or gets high in % ..next u u have to move the dish 166-E u are currently on 152-E the best way to do it is u plug the signal finder into the dish..any way i did mine wit out the finder..i let my sis watch the tv while i was moving it to the east to 166...u also need to lift the dish facing up ..but moving it 3 mm u undo the screws that ...moves it up and down....while u move it slowly u will get the exact difference try to move the dish east first b4 u unscrew it.. move it ...and see if u can get sumthn..if not try lift the dish up..abit ..if not move it down best hint 4 me was.I LOOKED AT THE SCREWZ WHERE THEY MOVED FROM THEIR PLACE DA MEANS THE OLD MARK IS THE CORRECT PLACE FOR PAS8 TRY DOING DA TO UNSCREW THEM AND TIGHT THEM UP ON THE OLD MARK...good luck if u have a problem post it and i can help u more<br /> <br /> <small>[ 25. December 2004, 12:31 AM: Message edited by: sookeye06 ]</small>