Hi all,<br /><br />Long term reader, first time poster. <img border="0" title="" alt="[Smile]" src="images/icons/default/smile.gif" /> <br /><br />I've tried to search the forum for this info, but couldn't find anything.<br /><br />My father is very soon going to sign-up to UBI so he can watch the channels which were recently encrypted.<br /><br />The former TARBS box he is going to use is the 3100 model.<br /><br />Is it possible for him to still be able to receive ERT using this box once he is signed up and activated with UBI?<br /><br />Or is the only way he can watch ERT is to d/c the TARBS box and plug in his Dreamax box, which he has been using recently for FTA channels?<br /><br />Cheers,<br /><br />RATLSNAKE<br /><br />P.S. Anyone already on UBI able to tell me if Sigma or Alter Globe are fully operational, or are they still in testing?

Once you subscribe to UBI you can only watch the UBI channels <br /><br />One thing you can do is loop thru the Dreamax to the Tarbs box 3100 as the dreamax would have another hole at the back usually underneath were u plug the dish in call LNB OUT thats were u can plug a patch lead in and connect the tarbs box aswell thru the dreamax using one dish saves unplugging and plugging in all the time <br /><br />But for this method to work you have to make the Dreamax the Master and the TARBS Box the Slave so when you want to watch ERT the Tarbs box will lose signal but when u want to watch the UBI channels all u have to do is change the Dreamax to a UBI channel say SCTV as thats always FTA and then the Tarbs box will get signal again<br /><br />Reason for this is UBI channels are on Horizontal Polarity and ERT is on Vertical Polarity <br /><br />About Alter Globe and Sigma<br />Sigma stil testing on and off and Alter hasent started yet<br /><br />Anyway i think UBI will have ERT soon also just a matter of when <img border="0" title="" alt="[Smile]" src="images/icons/default/smile.gif" />

Thanks for the great reply LAZERSAT. I've been visiting your site too, got some good info.<br /><br />To set the boxes as Master and Slave, do I need to open them up and change something. i.e. do they contain jumpers on the internal circuit boards like a computer HDD, or is done some other weird and wacky way?<br /><br />Coz I'm pretty sure that there is such an option in my Dreamax's On-Screen Menu.<br /><br />Cheers,<br /><br />RATLSNAKE

all my boxes that i use i just plug and play and it works so i would say the dreamax would be the same just plug the LNB OUT of the Dreamax into the LNB IN on the Tarbs Box and it should work<br /><br />Just get a piece of coax with f type connectors on it and plug Dreamax LNB OUT to TARBS BOX LNB IN and it should work <img border="0" title="" alt="[Wink]" src="images/icons/default/wink.gif" />

Cheers.<br /><br />I'll give it a go once my father is up and running, and let you know how I went, in case others also want to know how to do this. <img border="0" title="" alt="[Smile]" src="images/icons/default/smile.gif" /> <br /><br />RATLSNAKE

kool man <img border="0" title="" alt="[Wink]" src="images/icons/default/wink.gif" />

Lazer,<br /><br />Always giving out helpful information

</font><blockquote><font size="1" face="Verdana, Arial">quote:</font><hr /><font size="2" face="Verdana, Arial">Originally posted by RATLSNAKE:<br /><strong> Hi all,<br /><br />Long term reader, first time poster. <img border="0" title="" alt="[Smile]" src="images/icons/default/smile.gif" /> <br /><br />I've tried to search the forum for this info, but couldn't find anything.<br /><br />My father is very soon going to sign-up to UBI so he can watch the channels which were recently encrypted.<br /><br />The former TARBS box he is going to use is the 3100 model.<br /><br />Is it possible for him to still be able to receive ERT using this box once he is signed up and activated with UBI?<br /><br />Or is the only way he can watch ERT is to d/c the TARBS box and plug in his Dreamax box, which he has been using recently for FTA channels?<br /><br />Cheers,<br /><br />RATLSNAKE<br /><br />P.S. Anyone already on UBI able to tell me if Sigma or Alter Globe are fully operational, or are they still in testing? </strong></font><hr /></blockquote><font size="2" face="Verdana, Arial">RATLSNAKE<br />Welcome to the forum.<br />If I were you I would buy a LNBF with a duel output (2 connectors on LNBF) and have one connector/cable for the UBI box and the other connector/cable for your other box so this way both your boxs run 100% independent from each other. The 2 or Duel output LNBF are cheap to buy, + a bit of RG-6 cable and one connector... Go for it!!. <img border="0" title="" alt="[Big Grin]" src="images/icons/default/grin.gif" /> <br />Phil

yeh but that means running cable thru the walls again and to wat rattlesnake says it will be running from 1 tv set so wont need to have both boxes working at once

Thanks everyone. The ideas and assistance are overwhelming.<br /><br />Liski, is there any word on the rumour that UBI wants to take ERT under their wing so UBI customers can use just the one box to watch all Greek channels on OptusB3?<br /><br />RATLSNAKE

A bit of work will not kill anyone and the running of the multi output LNB's are very good and solve many problems.

RATLSNAKE,<br /><br />UBI WORLD TV is trying to get ERT. I don't have any information at this point in time.

will it be free to air and will it stay fta like trt?

Deanops,<br /><br />As stated above: I don't have any information at this point in time.

cool thanks anyway

we all will have to wait on that one, and beig Xmas I cant see anything happening until mid Jan.

Hello everyone,<br /><br />I read everything you wrote in previous messages and make sence to me but I've got a question or maybe I would say a "clarification". <br /><br />I've got a TARBS box as well. I also have a FTA box "Dion" I've asked my sat technician if there is anyway to connect both to watch ERT as well and he said there is but it's "dangerous". Well not really dangerous but he told me I can burn out my LNB because TARBS is running on 240volts and DION is running on 180volts or something like that. Do you guys think this is true or he was bullshitting to me? <br /><br />What are your thoughts about that?<br /><br />P.S. Merry Xmas to everyone!

i would say his bullshiting u i have 4 boxes running off the single lnb for a long time now and never had a problem

So how do you control the power pass thru for all the boxes???..because if one box is on in V and other box on H...what happens???

wat i wrote above is wat i do if one box is on V they all have to be on V<br /><br />but most of the boxes dnt get used anymore just the tarbs box gets mostly used now the rest just sit on idle proberly pack them up soon LOL<br /> <br /> <small>[ 23. December 2005, 06:40 PM: Message edited by: LAZERSAT ]</small>

Well I got my father signed up this morning. Should be active by lunchtime.<br /><br />Going back to my original question, LAZERSAT I noticed you say that if one box is on V they all have to be on V.<br /><br />Now my TARBS box has been set to H, as that is what is required to access UBI's channels. However ERT is on a V transponder, so does this pose an issue for the setup you suggested? Or to get around this, (like you previously suggested) do I simply set my Dreamax box to SCTV?<br /><br />Also currently my signal strngth is only 60% and the signal quality at about 45%. I realise that I need a bigger dish as that is quite low, but if I do this loop setup will it mean the quality will be split even to each box meaning an ever lower signal?<br /><br />Thanks again.<br /><br />RATLSNAKE

Loop thru works ok doesnt lose signal at all <br /><br />Yes for the loop thru option like i said make the Dreamax the master and UBI box the slave then when u want to watch ERT just flick the dreamax to ERT and will work like normal then u will see the UBI box say no signal this is normal but when u want to watch UBI just flick the dreamax to SCTV then the ubi box will work again like normal and u can watch all the UBI channels without a problem

Loop thru works ok if surfing for channels on the same polarisation.<br /><br />If you loop through from the TARBS box to another FTA box, the FTA box won't be able to watch ERT (on the vertical pol) as the TARBS box has switched the LNB to the UBI channels (which are on the horizontal pol). The LNB can only switch 1 pol at a time. Thats why Lazersat uses the Dreambox to switch poles on the LNB.<br /><br />To overcome this issue a dual output LNB needs to be used where you run a cable to each IRD

Big Chief. Lazer use a Dreamax not a Dreambox, they're 2 different animals. <img border="0" title="" alt="[Smile]" src="images/icons/default/smile.gif" /> <img border="0" title="" alt="[Smile]" src="images/icons/default/smile.gif" /> <img border="0" title="" alt="[Smile]" src="images/icons/default/smile.gif" />

Like the Chief said and like I said before run an extra cable and use a dual output LNBF

Well today I bought a coax cable with F connectors from Dick Smith and followed Lazer's advice, and it works a treat. <img border="0" title="" alt="[Smile]" src="images/icons/default/smile.gif" /> <br /><br />I've noticed that the TARBS box receives a signal on any Horizontal channel I set on the Dreamax box, even if it's then turned off. Like Lazer said, it's only when the Dreamax is set to a Vertical channel that the TARBS box receives no signal.<br /><br />Thankyou all once again.<br /><br />RATLSNAKE

kool glad to hear its all working <img border="0" title="" alt="[Wink]" src="images/icons/default/wink.gif" />

Since there are alot of people here working for UBI or know alot about it... <br /><br />Would you know what's happening with the Greek package? I've heard they are gonna bring 10 channels. Is that right? There is only 5 currently working 6 if you include Sigma. What's happening with the rest? Like Alter, Extra etc.<br /><br />Any updates guys? <img border="0" title="" alt="[Wink]" src="images/icons/default/wink.gif" />

Stratos,<br /><br />There is no ETA for them coming on-air.

</font><blockquote><font size="1" face="Verdana, Arial">quote:</font><hr /><font size="2" face="Verdana, Arial">Originally posted by RATLSNAKE:<br /><strong> Well today I bought a coax cable with F connectors from Dick Smith and followed Lazer's advice, and it works a treat. <img border="0" title="" alt="[Smile]" src="images/icons/default/smile.gif" /> <br /><br />I've noticed that the TARBS box receives a signal on any Horizontal channel I set on the Dreamax box, even if it's then turned off. Like Lazer said, it's only when the Dreamax is set to a Vertical channel that the TARBS box receives no signal.<br /><br />Thankyou all once again.<br /><br />RATLSNAKE </strong></font><hr /></blockquote><font size="2" face="Verdana, Arial">i hope u don't have any problems with this setup but from my experience i can tell u that if the tarbs box doesnt recive the signal for a certain period of time while it's on ( this could be because of ur dish lost allignment or a connected second box like your case) tarbs box loses authourised channels list and u can't get to see some channels.<br /><br />I hope u dont get this kind of problem but if you do, now at least you know the reason.<br /><br />the only solution if you get, is a re-hit from ubi (sometimes more than once). forced remote update or mapping channel won't fix it.

This doesnt happen to me Sharp sometimes the olds watch ERT for a few hours and tarbs box regains signal again when i switch it back to a horizontal channel<br /><br />Even when i move the dish toi B1 ( with the moteck ) sometimes to watch a feed on there when i move the dish back tarbs box works straight away

thats really strange.<br /><br />i dunno the logic behind it but because of this problem i had to stabilise my dish to b3.<br /><br />it's really annoying when something happens to ubi channels on weekends or at nights cos there is no one to send a hit.

</font><blockquote><font size="1" face="Verdana, Arial">quote:</font><hr /><font size="2" face="Verdana, Arial">Originally posted by Liski:<br /><strong> Stratos,<br /><br />There is no ETA for them coming on-air. </strong></font><hr /></blockquote><font size="2" face="Verdana, Arial">Thank you Liski!