The new UBI software (UBI1.22) has been released.

If your STB hasn't updated please follow these steps:

· Tune & rescan your box
· Go to advance option and you will have a new option at the bottom called decoder upgrade
· Highlight decoder upgrade and press ok. And OK again (you will lose your picture if connected through RF which is ok)
· Decoder will upgrade for approximately 10 Minute, please do not interrupt till is finished.

Also the UBI and FTA channels are now in 2 bouquets "UBI WORLD TV" and "Public"

1. Press The TV button located underneath the number 9.
This should bring up Bouquet Selection. (Will Display For Around 4 – 5 Seconds Then Disappear)
2. If Public is Brown (highlighted), Press The DOWN Arrow Until UBI WORLD TV is Brown (Highlighted)
3. Press Ok. This Should Change box into UBI Mode.
UBI Channels should work.

If Customer wants to watch FTA channels Like ERT, Oman, Or Abu Dhabi
1. Press The TV button located underneath the number 9.
This should bring up Bouquet Selection. Will Display For Around 4 – 5 Seconds Then Disappear)
2. UBI WORLD TV is Brown (highlighted), Press The UP Arrow Until Public is Brown (Highlighted).
3. Press Ok. This Should Change box into Public Mode.

YOU WILL NEED TO FLICK BETWEEN EACH MODE TO WATCH CHANNELS YOU DESIRE
Public For (FTA) = ERT, Oman or Abu Dhabi
UBI World TV = UBI CHANS 1 – 85

Any visible/cosmetic changes?

so it won't be possible to move a FTA channel into UBI line up?

ShaRp,

I just tested it andit seems you can't.

I did the upgrade yesterday after lunchtime. The good thing I have found is that whatever channel you leave it on before changing to another bouquet, will still be there when changing to and from UBI to public channels.

i'm not gonna use this feature but it's essential for greeks. it's a hassle for them to switch to ERT now.