Hi Guys:<br />Ive relocated my dish and did a scan of B3 again and now I only recieve channels on vertical signal only.<br />Do I need to turn my LNB? (On the side it says DUAL POL) Does this mean it can recieve vertical and horizontal simultaneously.<br /><br />I was able to see B3 with all FTA Horizontal Channels,<br />Have Optus change their signal to only Vertical?<br />Pls help...Advice needed.<br /><br />Cheers DR<br /> <img border="0" title="" alt="[Confused]" src="images/icons/default/confused.gif" />

everything working fine here<br /><br />your LNB should be at the 6-7 oclock position

Is that looking@ it from the front of the disk?<br /><br />Are you able to recieve both vert and hor frequencies with a dual pol LNB.<br />Thanks for your quick reply:><br />DR

yes which ever way u look at it from front or back its about 6 oclock like the cable is hanging directly down the way i have it and works perfect with a 11300 LNB

I shall try this after work tonight.<br />6 oclock position sounds pretty good.<br /><br />Still puzzled over dual pol LNB.<br />Are they able to recieve both horizontal and vertical frequencies simultaneous???<br />OR the six oclock position is for horizontal only??<br /><br />Thanks..

Both Vertical and Horizontal work fine for me<br /><br />but if u have to boxes hooked up to one LNB with the signal splitted to 2 boxes on the sigle output LNB you can only watch Vertical at once on both boxes or Horizontal at once on both boxes<br /><br />You cant watch Horizontal on one box and Vertical on the other with the setup i described above

I pretty sure you will have to buy another lnbf.<br /><br />that one it had it. lost half of the internal circuit.<br /><br />Regards Tracesat brisbane

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by DrFeelGood:<br /><strong> Is that looking@ it from the front of the disk?<br /><br />Are you able to recieve both vert and hor frequencies with a dual pol LNB.<br />Thanks for your quick reply:><br />DR </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Remember every different manufacture has a different position. <img border="0" title="" alt="[Smile]" src="images/icons/default/smile.gif" />

Thanks guys:<br />I was entering only horizontal frequencies in the manual scan.<br />Now I have both vertical and horizontal freq's.<br /><br />My LNB works fine for both.<br /><br />Cheers....of to celevreate with a beer!!

Good to hear you got it all working <img border="0" title="" alt="[Wink]" src="images/icons/default/wink.gif" />