|
0 members (),
532
guests, and
29
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
1
|
2
|
3
|
4
|
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
There are no members with birthdays on this day. |
#10636
Fri 13 May 2005 06:09:PM
|
Joined: Aug 2004
Posts: 16
Astronaut Level 1
|
OP
Astronaut Level 1
Joined: Aug 2004
Posts: 16 |
Ok, i have some painters working around the building and they were on my roof yesterday and i think they moved my dish. I've lost the signal on my receiver(dish pointed to OptusB3-UBI FTA) and it says No Signal(Rain In Area) on all channels.<br /><br />Now, my signal meter shows 60% for signal level and around 5-10% on signal quality.<br /><br />So...you think somebody moved it or maybe something else?
|
|
CMS The Best Conveyancing solicitors conveyancing quotes throughout the UK
For any webhosting enquiries please email webmaster@aus-city.com
|
#10637
Fri 13 May 2005 06:20:PM
|
Joined: Feb 2004
Posts: 3,815
Mission Commander
|
|
Mission Commander
Joined: Feb 2004
Posts: 3,815 |
its been moved if ur only getting 5-10% quality u will need to adjust it back to were it was
|
|
#10638
Fri 13 May 2005 06:51:PM
|
Joined: Oct 2004
Posts: 162
Astronaut Level 3
|
|
Astronaut Level 3
Joined: Oct 2004
Posts: 162 |
and to do that like how lazer said...if u can climp up..and..face it 152 east if u have one of these tringler shape base for the dish..try to face ur dish twards the point of where the sharp edge of the base..that will give u the exact possition..good luck <img border="0" title="" alt="[Wink]" src="images/icons/default/wink.gif" />
|
|
#10639
Fri 13 May 2005 09:55:PM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
|
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
if it is a old tarbs box you`ve got, you will never get it back.<br />You need a another box, which is not an old tarbs box.Find the signal with another box and connect the old tarbs box back .
|
|
#10640
Fri 13 May 2005 10:48:PM
|
Joined: Nov 2004
Posts: 495
Payload Specialist Level 1
|
|
Payload Specialist Level 1
Joined: Nov 2004
Posts: 495 |
You may need to climb the roof several times while trying to get the signal. I don't think they have moved the dish more than few mm so just put a referance marking on the post where the dish holding bracket was clamped - scratch a line on both so the allignment can be done much easier. After the marking, try rotating the dish on one side only few mm and re-checked if the result negative after the second trial then move the dish back to the referance marking point and try the other side again. I'm sure you will get it quicker than trying to find someone...
|
|
#10641
Fri 13 May 2005 10:55:PM
|
Joined: Aug 2004
Posts: 377
Payload Specialist Level 1
|
|
Payload Specialist Level 1
Joined: Aug 2004
Posts: 377 |
Get someone to watch the signal meter while you adjust. Communicate by phone is easier than shouting out. Adjust the dish left to right or up or down slightly to increase the signal quality to about 50. Remember the signal quality readings is important so focus on it. <br /><br />Exit out of the menu when you maximise the signal quality. Tighten the nuts properly making sure that the signal quality is still the same.<br /><br />Good luck
|
|
#10642
Sat 14 May 2005 12:41:AM
|
Joined: Feb 2001
Posts: 4,142
Assistant Launch Director
|
|
Assistant Launch Director
Joined: Feb 2001
Posts: 4,142 |
Mark it with a Biro/Pencil first before moving, look for scratches on the pole, look for any clues to see where it originally was.
|
|
#10643
Sun 15 May 2005 07:47:AM
|
Joined: Aug 2004
Posts: 16
Astronaut Level 1
|
|
OP
Astronaut Level 1
Joined: Aug 2004
Posts: 16 |
Thanx guys, i'll try to do it tomorrow.
|
|
#10644
Tue 17 May 2005 08:24:PM
|
Joined: Dec 2004
Posts: 367
Mission Specialist Level 2
|
|
Mission Specialist Level 2
Joined: Dec 2004
Posts: 367 |
</font><blockquote><font size="1" face="Verdana, Arial">quote:</font><hr /><font size="2" face="Verdana, Arial">Originally posted by narkofan:<br /><strong> Thanx guys, i'll try to do it tomorrow. </strong></font><hr /></blockquote><font size="2" face="Verdana, Arial">Please let us know you didn`t falldown from roof <img border="0" title="" alt="[Eek!]" src="images/icons/default/shocked.gif" />
|
|
|
Forums60
Topics685,869
Posts720,480
Members2,957
| |
Most Online3,142
Jan 16th, 2023
|
|
|
