OK, hopefully someone can tell me what other makes/models share the plug(s). There's a two row whiteish plug, and a smaller green one with two rows also.
OK, hopefully someone can tell me what other makes/models share the plug(s). There's a two row whiteish plug, and a smaller green one with two rows also.
Any other advice welcome re the install.
Thanks!
I thought all pugs at that stage (405 era) had gone ISO 10487 already...in which case your new unit just needs the new ISO patch/connector... Could you elaborate a little bit more as to what you are doing... eg. car still has original H.U. or aftermarket...tell us more.
dino
Last edited by dinolovesjess; Sun 24 Oct 201005:51:PM.
Universal ISO adaptors are available and you should be able to wire it in to your new HU harness...but since its an aldi special..not likely to find a direct compatible ISO plug...unless its manufactured by one of the majors..not likely... Just hard wire the bugger in...its not that hard anyway...positive from ACC usually red...yellow is direct to battery (fused)...black is earth...you might have a blue (amp trigger)(or elec antenae)...and another (orange?) for illumination... the rest are speakers..f left f right r left r right..and they can easily be identified with a 9v battery...
Copyright 1996 - 2024 by David Cottle. Designed by David Bate Jr. All Rights Reserved.
By using this forum, the user agrees not to transfer any data or technical information received under the agreement, to any other entity without the express approval of the AUS-CITY Forum Admins and/or authors of individual posts (Forum Admins and DoD/USSPACECOM for the analysis of satellite tracking data).
Two-line elements (TLE) and all other satellite data presented and distributed via this forum and e-mail lists of AUS-CITY are distributed with permission from DoD/USSTRATCOM.
Reprise Hosting