NO COMMENT PETER<br />I would do something like that do you know over 30 people lost their jobs over that incident and they blamed me and another.<br /><br />The point is if you say that I haven't got the guts to stand up to any management you are wrong.<br /><br />Back to the Roof restoration, well what a Bastard of a day it was. I spent from 8.30 AM till 5pm scraping the Fucked, Not good, still very soft Pointing cement, one of the contractors helped me from 8.30AM till 3pm but he had to go to another job, but I got stuck into it to remove anything that was still soft. We removed around 75% of the pointing cement and all I hope is the stuff which remained will not fester up in the next few days/weeks/years.<br />Again I washed the roof at around 5pm to get all the crap off that I didn't clean up with the broom and cleaned the gutters out AGAIN!.<br />I have been very patient with Impulse Home Improvements QLD but my patience is running very thin.<br />Apparently they buy this pointing cement + all other Roof restoration products from "Modern" yes we have all seen their ads on TV and I don't think Impulse should be held responsible for this fuck up, their guys doing the job have been 95% ok even If I had to supervised them.<br />At the end off the day Impulse will have to be compensated for massive waste of time from the manafucturer of this defective product.<br />I also want to be compensated for what I have had to go through and I know that this roof will never be what it should have been. My personal opinion, all this excessive walking today will have caused damage to the base coats and remember that the final coats sit on the base coats so you can draw your conclusion from that. <br />Being stupid like I am, I did pay halfway through the completion of the job but trust me, that won't be the problem. <br />P.S. I used a video camera today so I have the evidence in case this matter has to go further.<br /><br />Phil <img border="0" title="" alt="[Mad]" src="images/icons/default/mad.gif" /><br /> <br /> <small>[ 14. July 2003, 10:03 PM: Message edited by: P Debono ]</small>